Free tool
Linear feet calculator for LTL freight
Linear feet is the length of trailer floor a shipment takes, front to back. Enter the pallet size, the number of pallets, whether they stack and the trailer's inside width, and the tool shows the linear feet used, the share of a 48 ft and a 53 ft trailer, and whether two published carrier linear foot rules would apply.
The 100 in default is an example: Utility Trailer lists 100 or 101 in at the wearband for its dry vans, and Wabash lists 101 in sidewall to sidewall. Measure your own trailer.
Trailer space used
- Linear feet
- 16.7 ft (5.08 m)
- Layout
- 5 rows of 2 across, 40 inches per row
- Share of a 48 ft trailer
- 35%
- Share of a 53 ft trailer
- 31%
Two published carrier rules
Purolator (Canada): 10 ft or more of trailer is ascribed 1,000 lb per linear foot, here 16,667 lb (7,560 kg).
PITT OHIO (United States): the rule applies, with a minimum rated weight of 8,500 lb (3,856 kg).
Each carrier bills the greater of the rated weight and the actual weight. Other carriers use other thresholds, and a contract can change them: check your carrier's rules tariff.
Floor length only: it does not check height, weight, axle limits or load securement. A 48 ft or 53 ft trailer is the overall length; the usable floor is a little less.
Sources: Purolator Terms and Conditions of Service, effective April 1, 2024 (purolator.com); PITT OHIO Rules Tariff item 575, Light or Bulky Freight (pittohio.com); Utility Trailer dry van specifications (utilitytrailer.com) and Wabash DuraPlate dry van sheet (onewabash.com) for inside width. Checked November 5, 2026.
Why linear feet matter on an LTL shipment
LTL carriers sell trailer space as well as weight. When a shipment takes a long stretch of floor, many carrier tariffs stop rating it on its weight alone and use a set weight per linear foot instead, so a light but bulky load can cost far more than its weight suggests. Knowing the linear feet before you book lets you choose between LTL, a volume quote and a full truckload with real numbers.
See the load arrive, not just leave
High Point GPS fleet tracking records every trip, the distance run, idle time and fuel use from engine data for each truck. Geofences around docks, terminals and customer sites show when a trailer arrives and leaves, so you can see how long loading takes and which stops hold trucks up.
Get a quoteTips to use fewer linear feet
Measure the trailer at its narrowest point, such as the scuff bands or logistic posts, because that decides how many pallets fit side by side.
Turning 48 × 40 in pallets so the 48 in side runs across the trailer saves 8 in of floor on every row, when the inside width allows two across.
Mark pallets that can be stacked, and say so on the bill of lading. A carrier works out linear feet from the way the freight can be loaded.
For the weight and class side of the same shipment, work out its density with a freight class calculator.
Linear feet questions
- What are linear feet in freight?
- Linear feet are the length of trailer floor a shipment takes, measured front to back, whatever its width. Pallets that sit two across count once per row. For example, ten 48 × 40 in pallets loaded two across fill five rows of 48 in, which is 240 in, or 20 linear feet of the trailer.
- How do you calculate linear feet for pallets?
- Find how many pallets fit across the trailer's inside width, divide the pallet count by that number (and by two if they stack two high), and round up to whole rows. Multiply the rows by the pallet length in inches that runs along the trailer, then divide by 12. The calculator does this for straight and turned loading.
- What is the LTL linear foot rule?
- It is a carrier tariff rule that rates a long shipment on its floor space. Purolator's terms ascribe 1,000 lb per linear foot to freight taking 10 ft or more of trailer. PITT OHIO's rules tariff uses 500 lb per linear foot at 12 ft or more across a 72 in width. Each carrier sets its own rule, so check yours.
- How many linear feet are in a 53 ft trailer?
- A 53 ft trailer is 53 feet long overall, and the usable floor inside is set by the manufacturer, so check the specification sheet or measure. The calculator compares your shipment with 48 and 53 feet as a guide. Inside width matters as much: Utility Trailer lists 100 or 101 in at the wearband for its dry vans.
- Does turning pallets reduce linear feet?
- Often, yes. A 48 × 40 in pallet turned so its 48 in side runs across the trailer takes 40 in of length per row instead of 48 in, as long as two fit across. Ten pallets then take about 16.7 feet instead of 20. Some carrier tariffs say the carrier is not liable to turn pallets, so load them turned yourself.