Free tool
Speed, distance and time calculator
Distance equals speed multiplied by time, so any one of the three follows from the other two. Pick the value you want to find, enter the other two in kilometres or miles, and the tool gives the answer, with time in hours and minutes.
Answer
Enter the two values you know to see the third.
Distance = speed × time. Speed = distance ÷ time. Time = distance ÷ speed.
Average speed of a trip with several legs
Enter each leg's distance and time. The average is the total distance divided by the total time.
- Total distance
- 0 km
- Total time
- 0 h 0 min
- Average speed
Why fleets work out speed, distance and time
Dispatchers use it to give a customer an arrival time, to check whether a delivery window is realistic, and to plan where a driver will be when a break is due. Working backwards from distance and time also shows the average speed a trip really took, which is usually lower than the speed limit once traffic, lights and stops are counted.
Use measured trips instead of guesses
High Point GPS fleet tracking records every trip, the distance run and idle time for each vehicle, so you can base arrival times on the average speed your vehicles actually reach on a route. Geofences record when a vehicle arrives at or leaves a site, which shows how long each visit took.
Get a quoteTips for better estimates
Use an average speed, not the speed limit. Traffic, lights and stops bring the real figure down, especially in cities.
Enter time as hours and minutes. 1 hour 30 minutes is 1.5 hours, not 1.3.
Add a break as its own leg with a distance of 0 to see how it lowers the average speed of the day.
Keep units together: kilometres with km/h, miles with mph. The tool changes both labels when you switch units.
Speed, distance and time questions
- What is the formula for speed, distance and time?
- Distance equals speed multiplied by time. Speed equals distance divided by time, and time equals distance divided by speed. Use matching units: kilometres with kilometres per hour, or miles with miles per hour, and time in hours. Convert minutes to hours by dividing them by 60 before you calculate.
- How do I work out travel time?
- Divide the distance by the average speed. For 240 km at an average of 80 km/h, the time is 240 ÷ 80 = 3 hours. If the answer has a decimal, multiply the decimal part by 60 to get minutes: 2.75 hours is 2 hours and 45 minutes. Add any planned breaks on top.
- How do I find the average speed of a trip with several legs?
- Add up the distance of every leg, add up the time of every leg, then divide the total distance by the total time. Do not average the leg speeds: a slow leg takes longer, so it counts for more of the trip. 60 km at 60 km/h and 60 km at 120 km/h average 80 km/h, not 90.
- How do I convert km/h to mph?
- Divide kilometres per hour by 1.609344, the exact number of kilometres in a mile, so 100 km/h is about 62.1 mph. To go from mph to km/h, multiply by 1.609344: 65 mph is about 104.6 km/h. Switching units in this calculator changes the labels, not the numbers you typed.
- Why is my real trip slower than the calculation?
- The calculation assumes the same average speed the whole way. Real trips include traffic, lights, construction, fuel stops, loading and required breaks, so the clock keeps running while the vehicle is slow or stopped. An average speed measured on past trips over the same route gives a closer estimate than the posted limit.