Free template
Reefer temperature log
A reefer temperature log records the temperature of a refrigerated load at set times during the trip, next to the setpoint the shipper asked for. Fill in the trailer, the load and the setpoint, then add a line per reading with the date, time, location, reading, initials and any corrective action, and print it or save it as a PDF.
What you type stays in this browser. Nothing is sent to us.Done? Save as PDF ↓
Reefer temperature log
Carrier and equipment
Load
Temperature readings
| Date | Time | Location | Reading | Setpoint | Initials | Corrective action |
|---|---|---|---|---|---|---|
Delivery
Signatures
Driver
Signature
Receiver
Signature
Use the setpoint, range and pre-cooling the shipper gave you. Under 21 CFR 1.912, shippers and carriers keep their written temperature procedures and agreements for 12 months after they stop being used, as originals, true copies or electronic records.
Rule cited: FDA, Sanitary Transportation of Human and Animal Food, 21 CFR 1.908 and 1.912 (law.cornell.edu/cfr/text/21/1.908, /1.912). Checked November 5, 2026.
Why a written temperature record matters
When a load is rejected, the first question is whether it stayed in range. In the United States, the FDA Sanitary Transportation rule (21 CFR 1.908(e)) says that, when the shipper or receiver asks, a carrier responsible for sanitary conditions must show that it kept temperature conditions during the trip, by any means the carrier and shipper agree on, such as time and temperature data taken during the shipment. The same rule asks the carrier to pre-cool refrigerated compartments as the shipper specifies.
Live trailer temperature instead of a clipboard
High Point GPS pairs GPS tracking with temperature sensors inside the trailer or cargo area, so dispatch sees the live temperature of every reefer trailer and truck, gets an alert when it drifts outside a set range, and keeps a time-stamped record of temperature and location for each trip.
Get a quoteFour tips for keeping a reefer log
Write the shipper's setpoint and acceptable range at the top before you leave, so every reading has something to be compared with.
Take readings at the same times on every trip, and add one each time you open the doors.
When a reading is out of range, write what you did in the corrective action column and when the temperature came back.
Give the receiver a copy at delivery and keep the original with the bill of lading.
Questions about reefer temperature logs
- What should a reefer temperature log include?
- Identify the carrier, trailer, reefer unit and driver, then the shipper, load number, product, setpoint, acceptable range and unit mode. Each reading gets a line with the date, time, location, temperature, setpoint, the initials of the person who read it and any corrective action. Finish with the temperature at delivery and the receiver's signature.
- Does the FDA require carriers to log reefer temperatures?
- The FDA Sanitary Transportation rule does not prescribe a log form. Under 21 CFR 1.908(e), a carrier responsible for sanitary conditions must, on request, give the receiver the operating temperature the shipper specified and show the shipper or receiver that temperature conditions were kept, by any means they agree on, such as time and temperature data taken during the trip.
- What is pre-cooling, and who asks for it?
- Pre-cooling brings an empty refrigerated compartment down to temperature before loading. Under the FDA rule (21 CFR 1.908(e)(3)), a carrier offering a vehicle with an auxiliary refrigeration unit must pre-cool each mechanically refrigerated compartment as the shipper specifies. Write the pre-cool temperature on the log before the load goes in.
- Is anything I type sent to High Point GPS?
- No. The log runs entirely in your browser, and nothing you type is sent to us. Your entries stay in this browser on this device until you clear them. When it is done, print it for signatures or save it as a PDF, and clear the form if you use a shared computer.
- How does GPS tracking help with reefer temperatures?
- High Point GPS pairs tracking with temperature sensors in the trailer or cargo area. Dispatch sees the live temperature of each reefer next to its location, gets an alert when it drifts outside a set range, and keeps a time-stamped record of temperature and location for buyers and auditors. High Point GPS sets it up and supports it, in English and French.